...::::::RAMKRISHNAGSM::::::...


Join the forum, it's quick and easy

...::::::RAMKRISHNAGSM::::::...
...::::::RAMKRISHNAGSM::::::...
Would you like to react to this message? Create an account in a few clicks or log in to continue.

.::: GSM HARDWARE AND SOFTWARE SUPPORT FORUM :::.


You are not connected. Please login or register

MT6516 flashing tutorial

Go down  Message [Page 1 of 1]

1MT6516 flashing tutorial  Empty MT6516 flashing tutorial Tue 20 Mar 2012, 8:45 pm

Admin

Admin
Admin
Admin

MT6516 flashing tutorial

Here you can find the instructions on how to flash your MT6516 based phone. Although example images shown here refer to HOT HD9, you can flash other phones based on this MediaTek chipset, with the correct ROM files, of course. Make sure you read everything carefully and know what you are doing. Don't blame me for any damage on your phone.

What's needed:

Flashing cable (USB to UART cable with PL2303 chip)

MT6516 flashing tutorial  USB+to+UART+%2528PL2303%2529


When the process is finished a new window will pop up, just press OK to continue.






  • USB data cable

  • SP Flash Tool

  • SN Write Tool (alternatively Maui META or WriteCode can be used as well)


And now the tutorial...

  • Make sure that you have already installed the Profilic PL2303 drivers needed for the USB to 3,5 mm headphone cable.


  • Open SP Flash Tool for MT6516 and chose which system you want to flash in your HD9. Under project you are able to choose Android or Windows Mobile.



  • Make sure you have selected the right COM port is selected and that baud rate is set to 921600 bps.


  • Click on Format to literally format NAND flash of your HD9.

MT6516 flashing tutorial  Snap1



Then turn off your HD9, remove the battery and plug the serial cable to the PC and the jack to the phone.
Click Start, replace the battery and press power button for a few seconds until you see the red progress bar along with the message Format All is Processing.



MT6516 flashing tutorial  Snap2


After the red progress bar is complete, the real format will begin and a green progress bar will appear.


MT6516 flashing tutorial  Snap3MT6516 flashing tutorial  Snap4

MT6516 flashing tutorial  Snap5


Now remove the battery once again, keeping the serial cable connected to the PC and the phone.
Click Download and make sure that every file needed to flash Android / Windows Mobile is selected:
Android
BK Modem DB / RS Modem DB - BPLGUInfoCustomApp_MT6516_S01_MAUI_10A_W10_48
BK AP DB / RS Modem DB - APDB_MT6516_S00_2010_20
PRELOADER - preloader_bird16_a10y.bin
UBOOT - uboot_bird16_a10y.bin
BOOTIMG - boot.img
RECOVERY - recovery.img
SEC_RO - secro.img
ANDROID - system.img
LOGO - logo.bin
USERDATA - userdata.img
Windows Mobile
BK Modem DB / RS Modem DB - BPLGUInfoCustomApp_MT6516_S01_MAUI_09B_W10_16_MP_V 5
BK AP DB / RS Modem DB - APDB_MT6516_S00_2010_20
FLASH BIN file - flash.bin
XLDR - MT6516_mldrnandforMTK.nb0
EBOOT - MT6516_EBOOTNAND.nb0


MT6516 flashing tutorial  Snap6


Click Start, replace the battery and press power button for a few seconds until you see the red progress bar along with the message Download is Processing.


MT6516 flashing tutorial  Snap7


After the red progress bar is complete, there will appear a purple progress bar.

MT6516 flashing tutorial  Snap8


Right after the purple progress bar is complete, you’ll have to connect the normal USB data cable. The message will appear under the progress bar: “Please insert USB cable in x seconds”.
Report Post
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiShare on FacebookTwitterStumble this Post!

https://ramkrishnagsm.forumotion.com

Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum