...::::::RAMKRISHNAGSM::::::...


Join the forum, it's quick and easy

...::::::RAMKRISHNAGSM::::::...
...::::::RAMKRISHNAGSM::::::...
Would you like to react to this message? Create an account in a few clicks or log in to continue.

.::: GSM HARDWARE AND SOFTWARE SUPPORT FORUM :::.


You are not connected. Please login or register

...::::::RAMKRISHNAGSM::::::... » Flashing and Unlock Boxes » JAF by Odeon » Supported extra Firmwares for DCT4 Asic2 Patch

Supported extra Firmwares for DCT4 Asic2 Patch

Go down  Message [Page 1 of 1]

ranjit

ranjit
Co-Administrator
Co-Administrator

Supported extra Firmwares for DCT4 Asic2 Patch

1100 Firmwares Supported-->All firmwares patched but NO SIGNAL
1110 " " -->3.42
1600 " " -->3.42-4.04-(5.03*)
2300 " " -->All firmwares patched but NO SIGNAL
2600 " " -->All firmwares patched but NO SIGNAL
2650 " " -->(6.19**)
3100 " " -->6.01-6.11
3120 " " -->6.11
3220 " " -->3.30-3.60
5140i " " -->4.04 or convert into 5140
6020 " " -->(4.10***) Without Network
6610 " " -->5.52
6310i " " -->7.00
7200 " " -->All firmwares patched and working
7210 " " -->All firmwares patched and working
7250 " " -->All firmwares patched and working
7260 " " -->3.36
8310 " " -->6.20 and any other version
8910i " " -->4.46

(*) 1600 RH-64 v5.03 21-04-06 - No network after patching, we can't downgrade because the phone will not power on

(**) 2650 McuSw v6.19 and 3200 McuSw v5.34 JAF is not able to patch them - The soft keeps at "decrypting..."

(***) 6020 McuSw v4.10 JAF patch and load the file but the phone keeps at No Netwrok

BR



sme 1600 u can do imi patch 3.05 ver it 1000 working

2Supported extra Firmwares for DCT4 Asic2 Patch Empty how to use imei patch in jaf Tue 06 May 2008, 4:14 pm

ranjit

ranjit
Co-Administrator
Co-Administrator

--------------------------------------------------------------------------------

how to use imei patch in jaf
1. read phone info (dct-4 only)
2. click imei tool and select imei patch
3. enter 14 digit imei #
4. select mcu, the same version that you read on phone info.
5. wait for about 6 seconds and thats it.


Imei Patch Solution& Supporting Models Here

Firstly you must check the phone version. If the version it's supported then continue, if not you must flash it before continue.

Second step. When you click on IMEI Patch a new window it's suppossed to appear. You must write the new IMEI there, remember 15

digits
Now the JAF software will patch your phone.

The version of patched firmwares it's contained in the folder -->Program Files/Odeon/Jaf/Jaf IMEI Patch

Supported extra Firmwares for DCT4 Asic2 Patch

1100 Firmwares Supported-->All firmwares patched but NO SIGNAL
1110 " " -->3.42
1600 " " -->3.42-4.04-(5.03*)
2300 " " -->All firmwares patched but NO SIGNAL
2600 " " -->All firmwares patched but NO SIGNAL
2650 " " -->(6.19**)
3100 " " -->6.01-6.11
3120 " " -->6.11
3220 " " -->3.30-3.60
5140i " " -->4.04 or convert into 5140
6020 " " -->(4.10***) Without Network
6610 " " -->5.52
6310i " " -->7.00
7200 " " -->All firmwares patched and working
7210 " " -->All firmwares patched and working
7250 " " -->All firmwares patched and working
7260 " " -->3.36
8310 " " -->6.20 and any other version
8910i " " -->4.46

Back to top  Message [Page 1 of 1]

...::::::RAMKRISHNAGSM::::::... » Flashing and Unlock Boxes » JAF by Odeon » Supported extra Firmwares for DCT4 Asic2 Patch

Permissions in this forum:
You cannot reply to topics in this forum